An attempt to download a free version of WiNRADiO Virtual Sound Card from unknown external sources may be unsafe and in some cases illegal. FDM Lib shall include an option for direct download from developers, should it become available in the future. Dante's InfraX This application is based on several included plugins which can be enabled. WiNRADiO Virtual Sound Card WiNRADiO Digital Bridge Virtual Sound Card is a program designed to transfer. $49.95 DOWNLOAD. Virtins Sound Card MultiInstrument Multi-Instrument is a powerful sound card based multi-function virtual.
- Virtins Sound Card Oscilloscope 3.2 Crack Free
- Virtins Sound Card Oscilloscope 3.2 Crack Download
- Virtins Sound Card Oscilloscope 3.2 Crack Windows 10
Virtins Sound Card Instrument 2
Virtins Technology in Multimedia Sound Tools
Virtins Sound Card Instrument is a powerful PC based virtual instrument software. It consists of a sound card real time oscilloscope, a sound card real time spectrum analyzer and a sound card signal generator, and can run them simultaneously.
Virtins Sound Card Instrument is a powerful PC based virtual instrument software. It consists of a sound card real time oscilloscope, a sound card real time spectrum analyzer and a sound card signal generator, and can run them simultaneously. Unlike most of the sound card oscilloscopes in the market which search trigger event after data collection, it features a specially designed data acquisition approach which is able to monitor the input signal continuously without missing any trigger event before the frame of data is collected. As a result, Virtins Sound Card Instrument boasts a very fast screen refresh rate (typically 15 frame per second) and thus a truly real time response. It supports sophisticated triggering method including pre-trigger and post-trigger which are generally missing from other sound card based instruments. Virtins Sound Card Instrument features zooming and scrolling function and allocates most of the screen for data display, all of which are essential for you to exploring the fine details of the measurement data. In contrast, most of other sound card based instrument spent much precious screen space to simply mimic the panel of the conventional instrument. Virtins Sound Card Instrument provides a comprehensive range of functions including wave form addition, wave form subtraction, Lissajous Pattern display, transient signal recording, RMS amplitude spectrum display, Relative amplitude spectrum display, octave analysis, distortion analysis, phase spectrum display, auto correlation coefficient display, cross correlation coefficient display, function generation, arbitrary waveform generation, white noise and pink noise generation and sweep signal generation, etc. Virtins Sound Card Instrument stores data in either standard WAV file or TXT file. It supports WAV file importing and BMP file exporting and printing. Visit www.virtins.com for further details.
Virtins Sound Card Instrument 2 Sound Tools software developed by Virtins Technology. The license of this sound tools software is shareware$, the price is 49.95, you can free download and get a free trial before you buy a registration or license. Do not use illegal warez version, crack, serial numbers, registration codes, pirate key for this sound tools software Virtins Sound Card Instrument. If you want to get a full and unlimited version of Virtins Sound Card Instrument, you should buy from original publisher Virtins Technology.
File Size: 1.50MB License: SharewarePrice: $49.95
Virtins Sound Card Oscilloscope 3.2 Crack Free
Related:Sound Card Instrument - Card Oscilloscope Sound - Card Software Sound - Card Pc Sound - Pc Sound Card - Best Card Sound - Card Sound - Sound Card - Card Sound Xwave - Card Sound Yamaha
Platform: Win95,Win98,WinME,WinNT 3.x,WinNT 4.x,Windows2000,
Downloads: 467 Category: Multimedia Sound Tools
Virtins Sound Card Oscilloscope 3.2 Crack Download
What is Multi-Instrument?Multi-Instrument is a powerful PC based multi-function virtual instrument software. It is a professional tool for time, frequency and time-frequency domain analyses. It supports a variety of hardware ranging from sound cards which are available in almost all computers to proprietary ADC and DAC hardware such as NI DAQmx cards, Virtins Technology’s Digital Storage Oscilloscopes (VT DSO), Virtins Technology’s Real Time Analyzers (RTA) and so on. It consists of an oscilloscope, spectrum analyzer, signal generator, multimeter and five add-on software modules: data logger, spectrum 3D Plot, vibrometer, LCR meter and device test plan, all of which can run simultaneously and in real time. It has been widely used in education and training, scientific research, audio and acoustic engineering, electronic engineering, vibration analysis, medical diagnosis, musical instrument inspection, etc. The software can be downloaded from: www.virtins.com/MIsetup.exe for a 21-day fully functional FREE trial, using your computer sound card as the ADC and DAC devices.
What is a Multi-Instrument system?
A Multi-Instrument system consists of three layers (from front end to back end, as shown in the figure below): sensor layer, data acquisition hardware layer and virtual instrument software layer (i.e. Multi-Instrument).
The sensor layer is made up of sensors and their pre-amplifiers (if necessary). It converts physical quantities to electronic signals which can then be quantized by the data acquisition layer. It defines the field of application of the Multi-Instrument system. For example, a passive oscilloscope probe or active differential oscilloscope probe can be used to measure electronic or electrical voltage signals; a current clamp can be used to measure electronic or electrical current signals; a microphone can be used to sense sounds, an acceleration sensor can be used to sense vibration; an ECG sensor can be used to sense the electrical activity of the heart, etc..The sensor lay can also contain actuators such as speakers.
The data acquisition hardware layer contains the data acquisition hardware such as Virtins Technology's PC based USB Oscilloscopes, Spectrum Analyzers and Signal Generators, Virtins Technology's Real Time Analyzers, NI DAQmx cards, sound cards, etc. It scales, conditions and quantizes the electronic or electrical signals passed on by the sensor layer. Together with the sensor layer, it defines the measurement accuracy and precision of the Multi-Instrument system. This layer can also contain DAC hardware which converts the digial signal from the computer to analog signal in order to driver the actuators such as speakers in the sensor layer.
The virtual instrument software layer is dominated by the Multi-Instrument software. It defines the functions and Graphical User Interfaces (GUI) of the Multi-Instrument system.
In general, the Multi-Instrument system is extremely powerful, flexible, customizable, yet cost-effective. Simply through software configuration without any coding, it is possible to achieve custom functions that can only be realized through custom software development using programming tools such as Labview, Matlab, C++, etc. A properly configured Multi-Instrument system will meet your every need in test, measurement, monitoring and control.
What can a Multi-Instrument system do?
Oscilloscope
separate waveforms, waveform addition, subtraction and multiplication, Lissajous Pattern, mixed signal display, long-time signal recording (streaming mode), pre-configured or arbitrary digital filters (FFT, FIR, IIR), half/full wave rectification, demodulation (AM, FM, PM), digital persistence display, equivalent time sampling, roll mode, etc..
Spectrum Analyzer
amplitude spectrum, octave analysis (1/1, 1/3, 1/6, 1/12, 1/24, 1/48, 1/96), frequency compensation, frequency weighting (A, B, C, ITU-R 468), peak hold, linear / exponential average, measurement of THD, THD+N, SNR, SINAD, Noise Level, IMD, Bandwidth, Crosstalk, peaks, harmonics, wow & flutter, sound loudness and loudness level; phase spectrum, auto / cross correlation, coherence function, transfer function (Bode plot, gain and phase plot, or frequency response), impulse response. Support 55 window functions and window overlap.
Signal Generator
function / multitone / arbitrary waveform / burst tone / MLS / DTMF / musical scale / white noise / pink noise generation, frequency/amplitude sweep, fade in/out, output modulation (AM, FM, PM), wave file replaying. Support both streaming mode and DDS mode.
Multimeter
voltmeter, sound pressure level meter(dB, dBA, dBB, dBC), frequency counter, RPM meter, counter, duty cycle meter, F/V converter, cycle mean/RMS, pulse width.
Vibrometer
waveform conversion among acceleration, velocity and displacement, when the raw data are acquired from acceleration, velocity or displacement sensors. This function is designed specially for vibration analysis.
Spectrum 3D Plot
waterfall and spectrogram.
Data Logger
long time data logging for 185 derived data points (DDP) and 16 user defined data points (UDDP), including RMS values, peak frequencies, sound pressure levels, RPM, THD, etc. Up to eight data logger windows can be opened and each window can trace up to 8 variables.
LCR meter
measure the value of an inductor, capacitor or resistor, or the impedance of a network of them.
Device Test Plan
It provides a mechanism to configure and conduct the user’s own device test steps. It takes the advantage of the sound card’s (or other ADC/DAC device's) capability of simultaneous input and output, to generate a stimulus to the Device Under Test (DUT) and acquire the response from that device at the same time. Different stimuli can be generated and the response can be analyzed in different ways. The DUT can be marked as PASS or FAIL after a sequence of test steps. Device Test Plan supports connection with external systems through serial communication.
DDP Viewer
It is used to display the value of a Derived Data Point (DDP) in a dedicated window with bigger font size. It is also possible to specify the DDP’s high-hgih, high, low, low-low limits for alarming and the number of decimal places for display. Up to 16 DDP viewers can be opened. These DDP viewers can also be used to define and display User Defined Data Points (UDDP). A UDDP can be expressed as a function of DDPs and earlier-updated UDDPs. The mathematical expression may consist of constants, DDPs, UDDPs, mathematical operators, and mathematical functions.
General Functions
Sensor Sensitivity
The acquired data can be rescaled according to the sensor sensitivity configured by the user so that the displayed data are expressed in engineering unit corresponding to the physical quantity sensed by the sensors. This is very different from a conventional oscilloscope whereby only voltage can be displayed.
Graph Operation
Zooming and Scrolling is supported in all graphs, allowing you to investigate the fine details of the data. This is very important when a large amount of data are displayed in one screen. A cursor reader is provided in each graph to show the x and y readings of the actual measurement point. For Spectrum 3D Plot, the cursor reader supports the readout of x, y, t values of the actual measurement point. Two markers are provided in each graph to get the x and y readings of the actual measurement points nearest (in horizontal direction) to the points of the mouse clicks. Five chart types are supported: Line, Scatter, Column, Bar, Step. Line width and colors of the graph are configurable. Options are provided to either display all data points (slow) or only display one data points per vertical raster line (fast). The data in any graph can be copied into the clipboard as text and later paste into other software such as Microsoft Excel for further analysis. The image of the graph can be copied into the clipboard as Bitmap image and later paste into other software such as Microsoft Word.
Reference Curves
Up to five reference curves can be set for each channel in each graph. The reference curve can be configured by either copying the current curve, or loading a properly formatted text file or a previously saved reference file from the hard disk.
File Import and Export
The collected frame of data can be saved as a wave file (*.wav) or exported as a text file (*.txt). All analysis results can be exported as text files (*.txt). All graphs can be exported as bitmap files (*.bmp) or printed out directly. A long wave file can be imported frame by frame either manually or automatically. Wave files with PCM format or properly formatted text file can be imported for analysis. The signal generated by the signal generator can be saved as a wave file or a text file for a given duration of up to 1000 seconds.
Data Merging and Extraction
Combining data from individual channels of different wave files, and extracting part of data from a wave file are supported.
Save and Load Panel Setting
You can save your preferred instrument panel setting either as default or as a customized panel setting for later use.
Controls/Options Enabling and Disabling
Graphical User Interface items such as menu items, button, combo box, edit box, radio box, check box are enabled/disabled based on context, so as to void any mis-understanding and mis-operation.
Multilingual User Interface
It supports Multilingual User Interface under Windows XP, Vista, 7, 8/8.1/10. Supported languages are English, French, German, Italian, Portuguese, Spanish, Russian, Simplified Chinese, Traditional Chinese, Japanese and Korean.
Software Customization
Multi-Instrument provides the following user customizable features:
1) You can save a frequently used panel setting as a Panel Setting File
2) You can save your default pane setting so that it will be loaded right after software startup.
3) You can configure your frequently used Panel Setting Files in the Hot Panel Setting Toolbar, so that they can be loaded at one single mouse click.
Software Development
1. Multi-Instrument can work as an ActiveX automation server so that an external program can access the data and functions that Multi-Instrument exposes. You can integrate Multi-Instrument into your own software seamlessly via the ActiveX automation server interfaces exposed by Mutil-Instrument. Please refer to: Multi-Instrument Automation Server Interfaces.
2. You can use the vtDAQ and vtDAO interface DLLs supplied in the software to allow your own back-end software to interface to sound cards, NI DAQmx cards, VT DSOs, VT RTAs, etc.. As all these devices conform to the same vtDAQ and vtDAO interface standard, you only need to write the interface codes in your program once and your program will support all these devices. You can also develop your own vtDAQ and vtDAO compatible DLLs to allow Multi-Instrument to interface to your own hardware. Please refer to: vtDAQ and vtDAO Interfaces.
3. Virtins Technology’s Signal Processing and Analysis (vtSPA) Application Programming Interfaces (APIs) provides a suite of generic APIs for data processing and analysis. It contains some unique features / algorithms originated and only available from Virtins Technology. Please refer to: Signal Processing and Analysis (vtSPA) Interfaces.
>>more
What is the second-generation VT DSO (Digital Storage Oscilloscope)?
The second-generation VT DSOs are the latest PC based USB oscilloscopes, spectrum analyzers and signal generators designed and developed by Virtins Technology. They feature Virtins Technology’s unique hardware-based DSP algorithm which enhances the performance and functionality dramatically without adding extra hardware cost. When used in conjunction with Multi-Instrument software, these VT DSOs convert any desktop, laptop, or tablet PC into a powerful oscilloscope, spectrum analyzer, multimeter, data logger, signal generator and so forth, all of which work simultaneously.
Compared with the first-generation VT DSOs and those USB oscilloscopes from other manufacturers, this new generation has the following major advantages:
1) Hardware DSP Based Bit Resolution Enhancement for Oscilloscope
2) Streaming Mode in Oscilloscope
3) Oscilloscope Digital Trigger and Trigger Frequency Rejection
4) Oscilloscope Persistence Mode
5) External Trigger Input Channel as a Digital Input Channel
6) Adaptive Anti-aliasing Filter for Spectrum Analyzer
7) Signal Generator DDS and Streaming Modes
8) Signal Generator DDS Interpolation
9) Simultaneous Data Acquisition and Data Output
10) Calibration and Re-Calibration
11) Upgradable Software, Firmware, and Hardware Based DSP Algorithm
>>more details
What is a RTA (Real Time Analyzer)?
Real Time Analyzers (RTAs) or Real Time Audio Analyzer are often used by sound engineers and acousticians installing audio systems in all kinds of listening spaces: auditorium, home theatres, cars etc. They are used to measure in real time the frequency response of an audio system within the confinement of the environment, taking into account the frequency response of the audio system itself as well as all the environmental effects such as resonance and constructive and destructive interference. One can then adjust the equalizer to make an inversed frequency response such that the combined frequency response is flat or aligned to the preference of the audiences. Normally pink noise is used as the test tone and octave analysis is set in the spectrum analyzer.
Virtins Sound Card Oscilloscope 3.2 Crack Windows 10
VT RTA-168 is a PC based USB real time analyzer, sound level meter and distortion analyzer, polarity tester... It is able to perform all the functionality of a conventional RTA such as the measurements of frequency response and sound level, with finer resolution and higher accuracy thanks to the computing power of a modern computer. In addition, it can measure various types of distortion and perform a comprehensive set of functionality that is usually not found in a conventional RTA.>>more